019 Guide: How To Effortlessly Change The Battery In Your Nvidia Shield Remote

Quick summary

Changing the battery in your NVIDIA Shield remote is a simple and straightforward process that can be completed in just a few minutes.
In this comprehensive guide, we’ll walk you through the steps on how to change the battery in your NVIDIA Shield remote for the 2019 model.
The battery compartment of the NVIDIA Shield remote is located at the bottom of the remote.

Are you experiencing issues with your NVIDIA Shield remote control, such as unresponsive buttons or a rapidly draining battery? It might be time to replace the battery. Changing the battery in your NVIDIA Shield remote is a simple and straightforward process that can be completed in just a few minutes. In this comprehensive guide, we’ll walk you through the steps on how to change the battery in your NVIDIA Shield remote for the 2019 model.

Required Tools and Materials

Before you begin, ensure you have the following tools and materials:

A new CR2032 coin cell battery
A small Phillips head screwdriver
A plastic pry tool (optional)

Step 1: Power Off the NVIDIA Shield Device

To prevent accidental button presses or device interference, turn off your NVIDIA Shield device before starting the battery replacement process. You can do this by pressing the power button on the front of the device or using the remote control.

Step 2: Locate the Battery Compartment

The battery compartment of the NVIDIA Shield remote is located at the bottom of the remote. Look for a small, rectangular panel with a single screw in the center.

Step 3: Remove the Battery Compartment Screw

Using the Phillips head screwdriver, carefully remove the screw securing the battery compartment panel. Be mindful not to lose the screw.

Step 4: Open the Battery Compartment

Once the screw is removed, gently pry open the battery compartment panel using your fingers or a plastic pry tool. Be careful not to damage the panel or the remote’s internal components.

Step 5: Remove the Old Battery

Inside the battery compartment, you will find the old CR2032 coin cell battery. Use your fingers or a plastic pry tool to gently remove the old battery from its compartment. Dispose of the old battery properly according to your local regulations.

Step 6: Insert the New Battery

Take the new CR2032 coin cell battery and insert it into the battery compartment with the positive (+) side facing up. Ensure the battery is properly seated in the compartment.

Step 7: Close the Battery Compartment

Once the new battery is inserted, carefully align the battery compartment panel with the remote’s body and press it down until it snaps into place.

Step 8: Replace the Battery Compartment Screw

Retrieve the screw you removed earlier and use the Phillips head screwdriver to secure the battery compartment panel back in place. Tighten the screw until it is snug.

Step 9: Test the Remote

With the new battery installed, turn on your NVIDIA Shield device and point the remote at it. Press various buttons on the remote to ensure they are functioning correctly. If the remote is working properly, you have successfully replaced the battery.

Troubleshooting

If you encounter any issues during the battery replacement process or the remote is still not working correctly, try the following troubleshooting steps:

Ensure the new battery is inserted correctly with the positive (+) side facing up.
Check the battery contacts for any dirt or debris. Clean the contacts with a cotton swab and rubbing alcohol if necessary.
Try using a different new CR2032 coin cell battery to rule out a faulty battery.
If the remote is still not working, contact NVIDIA customer support for further assistance.

Final Note: Enjoying a Fully Functional NVIDIA Shield Remote

By following the steps outlined in this guide, you can easily replace the battery in your NVIDIA Shield remote and restore its functionality. With a fresh battery, you can continue enjoying seamless control of your NVIDIA Shield device for years to come.